Sewing machine manufacturers
your current location : Home >> Products >> Stitching machine

Products Product

contact usContact Us

Tongxiang Taoshen Machinery Co., Ltd.

Contact: Mr. Cheng

Mobile: 13575318020

Email: 13575318020@163.com

Address: No. 398, Hengye Road, Puyuan Industrial Park, Tongxiang, Jiaxing, Zhejiang

Official website: www.taoshenjx.com

Official website: en.taoshenjx.com

Sewing machine table

Sewing machine table

  • category:Stitching machine
  • Views:Times
  • Release date:2020-06-11 08:43:01
  • product description

Installation method of sewing machine

1. Installation of flower wheel

When installing the flower wheel, the mold base must be placed in the rising position. Remove the left cover plate of the flower wheel mold base, install the flower wheel, install the left cover plate of the mold base lock the screws. Lower the flower wheel frame to make the flower wheel contact with the mold, adjust the eccentric wheel to make the working surface of the flower wheel parallel to the working surface of the mold.

2. Adjustment method of flower wheel:

1) The threading machine can be placed in the pressing wheel the flower wheel with A4 paper (as shown in the figure below), the pressure is adjusted to 1.5kg, the adjusting nut of the flower wheel cylinder is unscrewed upward without limit, then the upper lower mold speed buttons are adjusted to the scale 2 position, the output power is adjusted to the 4 position, the pressing wheel switch is pressed, then the flower wheel pedal is pressed, then the foot pedal is stepped, until the flower wheel has walked at least one circle, then the flower wheel pedal is released, then the flower wheel pedal is stepped to make the flower wheel rise, Press the pressure wheel switch at the same time, let the pressure wheel rise, take out the white paper, check whether the embossing is balanced.

2) When the embossing is unbalanced, first loosen the locking screw of the eccentric wheel on the left cover plate of the mold base, then rotate the eccentric wheel (clockwise, the flower wheel moves upward; counterclockwise, vice versa (as shown in Figure 1)), lock the eccentric wheel, repeat the above actions until it is balanced.

3) After adjusting the level of the flower wheel with A4 paper, please adjust the screw cap of the flower wheel cylinder to screw down the limit at the same time, so that the flower wheel just contacts with the steel mold. (prevent the flower wheel sliding the steel mold colliding wearing)

4) Adjust the pressure of the flower wheel according to the thickness of the stitching knurling material. For thicker materials, the pressure should be increased, vice versa.

5) According to the different materials, thickness pattern complexity of the flower wheel to be fused, the following three aspects are comprehensively adjusted to achieve the ideal fusing effect: (1) linear speed of the flower wheel; (2) pressure of the flower wheel; (3) ultrasonic power.


1.png

label

Previous:Sewing machine table2020-06-11
Next:None

Recently Viewed:

Related Products

related news

135-7531-8020

Address: No. 398, Hengye Road, Puyuan Industrial Park, Tongxiang, Jiaxing, Zhejiang

Website: www.taoshenjx.com

Copyright © 2020 Tongxiang Taoshen Machinery Co., Ltd. All rights reserved 浙ICP备20007688号 Specializing in Looper,Sewing machine,Manufacturer of sewing machine,Welcome to inquire!